2 6- Nut Insert Clips. 6- Bolts with Lock Washers & Washers. 4- Allen Bolts with Washers and Nuts. FRONT INSERTS: Remove factory torx head bolts from.Note the front torx location. Clip Nut Insert (#2 in picture above) to center door frame at M. ARROW, aligning with center hole in insert. Reinstall factory torx bolts to attach insert to door at. Use the supplied bolt and washers #.
Picture above to secure insert to nut clip at M. TIP: For final adjustment and centering: Loosen the 4 torx bolts at L. ARROWS and also loosen the two torx. Bolts at the door latch striker "D" (not shown in pics, this is up front on the body plastic).When all 6 of these torx. Bolts are loose, door can be latched closed and moved around for perfect fit. Hold in place, then tighten. REAR INSERTS - Remove factory torx bolt at rear.
Use two nut insert clips for middle and front. Adjustment method as front doors for perfect fit. REAR TRIANGLES -- Identify the small triangular panels using picture above right.If you have the wrong triangles. Attach the Small Panel Z-Brackets to small triangles using allen bolts and hardware as shown in picture below. Clip small triangular panel in position, remove and reinstall roll cage bolt to secure. Also includes Rubber Trim and. 2 panels for the small triangles near the bed. Fit RZR 900 or RZR XP1000, showed in the picture. Thank you for purchasing the. Please read the instruction manual carefully before proceeding with the installation. We are not responsible for undeliverable address.
Our goal is to make sure you have a pleasant shopping experience with us. We will try our best to resolve the issues.
Please give us the opportunity to resolve any problem. Your recognition will make us more confident to develop business and serve you better.This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Body & Frame\Other". The seller is "bid2159" and is located in this country: US. This item can be shipped to United States.