Utv Rzr Polaris

RT PRO 2 LIFT KIT for Polaris RZR 170 UTV RTP5101225

RT PRO 2 LIFT KIT for Polaris RZR 170 UTV RTP5101225

RT PRO 2 LIFT KIT for Polaris RZR 170 UTV RTP5101225

RT PRO 2 LIFT KIT. We've relocated the rear upper shock mounts to manipulate the geometry of the rear end and relocated the front spindles while still using the stock front A-arms. By doing this, we've increased the ground clearance by two inches. The front kit is especially helpful for clearance because the arms stay at the same angle as stock while the spindle is lowered.

This provides even better arm to ground clearance than other "arm replacement" alternatives because the arm is put up higher along with the chassis which means there is even less to hit or drag across the arms with the RT Pro kit. As an added bonus, we've made sure the steering geometry remains correct while using this lift.

This is something most other companies do not seem to consider. The RT Pro RZR 170 Lift Kit uses heavy duty complete tie rod replacements which are raised and adjusted to work in unison with the factory steering rack and geometry.

The stock tie rods on the RZR 170 are a known weak point so when purchasing this kit you should consider the fact you are performing two much needed modifications at the same time. The RT Pro RZR 170 Lift Kit comes as a complete kit with everything needed for installation.

The rear shock relocation mount bolts in place with no drilling or mods to the chassis. There is an additional chain link provided with the kit which is needed to lengthen the chain slightly to work with the modified rear geometry. The front kit is also simple in that its a "clevis" style kit which slips over the factory spindle clevis and bolts in place using the supplied hardware. There is one hole per side which needs to be drilled though the factory arm clevis to install the necessary hardware but this is very simple if you have a drill and a 3/8 drill bit.

To install the tie rods the spindle arms must be drilled out to ½ to fit the adapter bushing but the rest is bolt-together. This kit also includes new, extended brake lines for the front brakes and wheel spacers to widen the rear end to match the adjusted width of the front.

All kits come standard in black powdercoat with no exceptions. APO'S & FPO'S. It takes 1 to 3 days to process your order and get it on its way.

The package spends another 3 to 10 days in transit and that depends on where you live relative to our warehouse location. In the event that an item is back ordered rest assured that Rockridge 4WD. Please note that Rockridge 4WD will not be responsible for labor expenses, towing expenses, additional repair expenses, rental car expenses or other related expenses caused by the duration of time required for you to receive the part(s) you won / ordered, or caused by any of the listed problems and any additional time required to fix them, or caused by the use of wrong, broken or defective part(s) during and/or after installation. Required by your country for importing consumer goods. We do not collect this beforehand, and cannot give you an estimate of the.

THANK YOU FOR YOUR DILIGENCE IN THIS MATTER. Feel free to inquire prior to returning your items. To get an RAN#, log in and send message to us with a return reason, we'll get back to you within 24-48 hours (allow additional time for weekends and holidays) with a RAN#.

If you need a replacement item right away, we suggest placing a new order in our store. Orders placed for the incorrect model year of your vehicle. Because manufacturers are constantly changing vehicle designs, we do not guarantee an older part will fit a newer vehicle. This includes all installation hardware, instructions, packaging and paperwork. Is an off-road web shop with a physical retail store with a full installation facility located in East Wenatchee, WA. We specialize in Jeeps and extreme off road vehicles. We have a wide range of experience in the off road industry but more specifically differential sales. We eat, sleep and breath 4x4 everything! We are more than happy to help! The item "RT PRO 2 LIFT KIT for Polaris RZR 170 UTV RTP5101225" is in sale since Wednesday, July 31, 2019. This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Brakes & Suspension\Lift Kits". The seller is "rockridge4wd" and is located in MULTIPLE WAREHOUSES.

This item can be shipped worldwide.

  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • California Prop 65 Warning: CALIFORNIA RESIDENTS WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/
  • Manufacturer Part Number: RTP5101225
  • Placement on Vehicle: Left
  • Brand: RT PRO
  • Warranty: YES

RT PRO 2 LIFT KIT for Polaris RZR 170 UTV RTP5101225