Simple Bolt On Unit with no modifications required. Consistent Horsepower and Torque Increase. Simply replaces the stock restrictive intake tube!
Works with your stock airbox and air filter. 4% power increase 30 minutes to install. Replaces your factory plastic intake tube from the throttle body to airbox with our mandrel bent and ultra-light aluminum intake tube. Very easy to install with a consistent power increase.Dyno tested and a big improvement in air flow over the stock tube this intake kit will increase power throughout the RPM range. On a stock RZR with only an open exhaust this intake made an additional 2 horsepower throughout the acceleration range with a consistent increase in torque. This equals out to consistently faster acceleration from stopped to the rev limit! Additional modifications will allow for a larger power increase. Dyno testing done with a stock ECU flash and EJK Fuel Controller.
With a reflash and 100% throttle opening the power increase will be even greater. The intake tube has a welded on provision for your crankcase vent hose. A simple bolt on unit with no permanent modifications required. This unit re-uses your stock airbox only replacing the intake tube. This air filter system seals tightly and will not easily allow dirt/sand into your intake tract like the stock airbox system.For an additional power increase you can upgrade this to a full intake system replacing your stock airbox. Silicon Intake Coupler and Elbow. 100% Made in the USA. The item "Polaris RZR 900 S 1000 Velocity Intake Tube 4% HP Increase 15-17 Aluminum Air" is in sale since Tuesday, August 9, 2016. This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Other". The seller is "malonemotor" and is located in Vancouver, Washington. This item can be shipped worldwide.